Inline Sheet Trim Roll Feed Granulator
Back
Overview
"PIMCO" introduces the New Generation Inline Sheet Feeding system Granulator to cater the crying needs of the market. PIMCO continues to blaze new trails in the field of plastic Processing with deep commitment for constant development of quality products- and better services to plastic Industry, again a step ahead to give its Customer utmost satisfaction by fulfilling their demands.
The Sheet feeding Granulator is designed in a view to serve the waste produced during production and to be reused at the same time. The speed of the Feed Roll Unit is adjusted according to the Sheet Iine production and the wastage rate by means of variable frequency drive. Three rotating and two fix blades are used to give optimum results.
The Sheet is fed through the chute which passes through gripped Jaws to pull the sheet, and is uniformly fed to the Granulator chamber. These machines are available in various models, depending upon the sheet width & also custom built machines can be produced.
Technical Specifications
| TECHNICAL SPECIFICATIONS OF INLINE/OFFLINE TRIM & SHEET GRANULATOR | ||||||
|---|---|---|---|---|---|---|
| Model | PSF - 200 | PSF - 300 | PSF - 500 | PSF - 600 | PSF - 700 | PSF - 900 |
| Length of Blades | 200mm | 300mm | 550mm | 650mm | 750mm | 450 x 2 = 900mm |
| No. of Blades | 5 | 5 | 5 | 5 | 5 | 6 + 4 = 10 |
| Throat Size | 200 x 200mm | 300 x 300mm | 550 x 300mm | 650 x 300mm | 750 x 300mm | 900 x 400mm |
| Feed Motor | 1HP | 1HP | 2HP | 2HP | 3HP | 5HP |
| Grinder Motor | 2HP | 3HP | 7.5HP | 10HP | 12.5HP | 20HP |
| Line Speed (Mtr./Min.) | 6 ~ 40 | 8 ~ 40 | 10 ~ 100 | 10 ~ 100 | 10 ~ 150 | 10 ~ 150 |
| Grinding Capacity | 25 ~ 40 Kgs/Hr | 50 ~ 75 Kgs/Hr | 100 ~ 125 Kgs/Hr | 150 ~ 200 Kgs/Hr | 200 ~ 300 Kgs/Hr | 300 ~ 400 Kgs/Hr |
| Type of Material | PS/PE/PP SHEETS | PS/PE/PP SHEETS | PS/PE/PP SHEETS | PS/PE/PP SHEETS | PS/PE/PP SHEETS | PS/PE/PP SHEETS |
| Thickness of Material | 0.2 ~ 0.9mm | 0.2 ~ 1.1mm | 0.3 ~ 1.5mm | 0.3 ~ 1.5mm | 0.3 ~ 1.5mm | 0.3 ~ 1.5mm |
| Width of Material | 20 ~ 80mm x 2Trims | 20 ~ 120mm x 2Trims | 500mm width sheet max | 600mm width sheet max | 700mm width sheet max | 800mm width sheet max |
Note
- Depends on Material, Sheet / Trim Thickness & feeding speed.
- All specification are subject to change without notice for constant product development.
- Higher Models available on request.
Special Features
- Compact and low sound level.
- Low power consumption with high output.
- Inline grinding prevents contamination & dust formation on scrap.
- Fully hygienic processing of food grade sheets.
- Low maintenance cost.
- Easy & fast cleaning system.
- Due to continuous uninterrupted operation saves Iabour.
Product Videos
Proud Members of
