Inline Sheet Trim Roll Feed Granulator
Inline Sheet  Trim Roll Feed Granulator

"PIMCO" introduces the New Generation Inline Sheet Feeding system Granulator to cater the crying needs of the market. PIMCO continues to blaze new trails in the field of plastic Processing with deep commitment for constant development of quality products- and better services to plastic Industry, again a step ahead to give its Customer utmost satisfaction by fulfilling their demands.

The Sheet feeding Granulator is designed in a view to serve the waste produced during production and to be reused at the same time. The speed of the Feed Roll Unit is adjusted according to the Sheet Iine production and the wastage rate by means of variable frequency drive. Three rotating and two fix blades are used to give optimum results.

The Sheet is fed through the chute which passes through gripped Jaws to pull the sheet, and is uniformly fed to the Granulator chamber. These machines are available in various models, depending upon the sheet width & also custom built machines can be produced.

Salient Features :

  • Compact and low sound level.
  • Low power consumption with high output.
  • Inline grinding prevents contamination & dust formation on scrap.
  • Fully hygienic processing of food grade sheets.
  • Low maintenance cost.
  • Easy & fast cleaning system.
  • Due to continuous uninterrupted operation saves Iabour.


TECHNICAL SPECIFICATIONS OF INLINE / OFF LINE TRIM & SHEET GRANULATORS
Model
PSF-200
PSF-300
PSF-500
PSF-600
PSF-700
PSF-900
Length of Blade
200mm
300mm
550mm
650mm
750mm
450 x 2 = 900mm
No.of Blades
5
5
5
5
5
6 + 4 = 10
Throat Size
200x200mm
300x300mm
550x300mm
650x300mm
750x300mm
900x400mm
Feed Motor
1HP
1HP
2HP
2HP
3HP
5HP
Grinder Motor
2HP
3HP
7.5HP
10HP
12.5HP
20HP
Line Speed (Mtr./Min.)
6~40
8~40
10~100
10~100
10~150
10~150
Grinding Capacity

25~40 Kgs/Hr

50~75 Kgs/Hr

100~125 gs/Hr

150~200 Kgs/Hr

200~300 Kgs/Hr

300~400 Kgs/Hr

Type of Material

PS/PE/PP SHEETS

PS/PE/PP SHEETS

PS/PE/PP SHEETS

PS/PE/PP SHEETS

PS/PE/PP SHEETS

PS/PE/PP SHEETS

Thickness of Material
0.2~0.9mm
0.2~1.1mm
0.3~1.5mm
0.3~1.5mm
0.3~1.5mm
0.3~1.5mm
Width of Material
20~80mm x 2 Trims
20~120mm x 2 Trims

500mm width Sheet Max.

600mm width Sheet Max.

700mm width Sheet Max.

800mm width Sheet Max
DEPENDS ON MATERIAL, SHEET / TRIM THICKNESS & FEEDING SPEED.
Note : ALL SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE FOR CONSTANT
          PRODUCT DEVELOPMENT.